Skip to main content

Changes to Step #3

Edit by CChin

Edit approved by CChin

Before
After
Unchanged

Step Lines

[* black] Logic board front
- [* red] Kioxia NAND Flash
+ [* red] Kioxia x GB NAND Flash
[* orange] Broadcom BCM57762 ethernet controller
[* yellow] Infineon (formerly Cypress Semiconductor) [link|https://www.cypress.com/part/cypdc1185b2-32lqxq|CYPDC1185B2-32LQXQ] USB type-C controller
[* green] Cirrus Logic CS42L83A audio codec
- [* light_blue] Analog Devices SSM3515B 31 W class-D audio amplifier
- [* blue] Analog Devices (formerly Linear Technology) [link|https://www.analog.com/en/products/ltc3890-2.html|LTC3890-2] 2-phase synchronous step-down converter (likely)
+ [* light_blue] Analog Devices [link|https://www.analog.com/en/products/ssm3515.html|SSM3515B] 31 W class-D audio amplifier
+ [* blue] Analog Devices (formerly Linear Technology) [link|https://www.analog.com/en/products/ltc3890-2.html|LTC3890-2] 2-phase synchronous step-down converter
[* violet] Texas Instruments [link|https://www.ti.com/product/TPS25982|TPS259827ON] 15 A eFuse w/ load current monitoring and transient fault management