Skip to main content

Changes to Step #6

Edit by Kevin Purdy

Edit approved by Kevin Purdy

Before
After
Unchanged

Step Lines

[* black] The rare 2.5 mm nut driver makes an appearance (you may remember its role in the [guide|48170|iPhone 6s|new_window=true])6s|new_window=true]), removing the nuts holding both the logic board and the logic board shield screws. Thanks to our [product|IF145-452-2|iPhone Marlin kit|new_window=true], we're covered!
[* black] The rare 2.5 mm nut driver makes an appearance (you may remember its role in the [guide|48170|iPhone 6s|new_window=true])6s|new_window=true]), removing the nuts holding both the logic board and the logic board shield screws. Thanks to our [product|IF145-452-2|iPhone Marlin kit|new_window=true], we're covered!
[* black] The logic board may be small but it's hefty. Turns out this beefy heat sink is nothing to sniff at!
[* black] Time for chips!