Skip to main content

Changes to Step #6

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] The 2.5 mm nut driver makes an appearance (you may remember its role in the iPhone 6s) removing the nuts holding both the logic board and the logic board shield screws. Thanks to the iPhone Marlin kit, we're covered!
[* black] The logic board may be small but it's hefty. Turns out this beefy heat sink is nothing to sniff at!
[* black] Time for chips!

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added