Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Riess Haslam

Edit approved by Riess Haslam

Before
After
Unchanged

Step Lines

[* black] Remove the camera panel by hand (black cover above the battery slot).
[* icon_caution] Be careful; there is a cable attached underneath the case. It does detach, just pull on it carefully.
[* icon_note] During reassembly, putreattach the cable back in by holding the black piecesilver-plated ending slightly above its slot and using the spudger to gently press the end of the cable backit into its fitting. Then, insert the black piececamera panel so it is flush with the blackback panel again.
[* icon_note] During reassembly, putreattach the cable back in by holding the black piecesilver-plated ending slightly above its slot and using the spudger to gently press the end of the cable backit into its fitting. Then, insert the black piececamera panel so it is flush with the blackback panel again.