Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Lucas David

Edit approved by Lucas David

Before
After
Unchanged

Step Lines

[* black] Remove the camera panel by hand (black cover above the battery slot).
[* black] '''Be careful; there is a cable attached underneath the case. It does detach, just pull on it carefully.'''
[* black] During reassembly, put the cable back in by holding the black piece slightly above its slot and using a small toolthe spudger to gently press the end of the cable back into its fitting. Then, insert the black piece so it is flush with the black panel again.
[* black] During reassembly, put the cable back in by holding the black piece slightly above its slot and using a small toolthe spudger to gently press the end of the cable back into its fitting. Then, insert the black piece so it is flush with the black panel again.