Changes to Step #4
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [title] Slice the lefthand-side adhesive |
| + | [* icon_note] If the adhesive becomes hard to cut, it has most likely cooled down. [guide|25705|Use your iOpener|new_window=true] to reheat it. |
| + | [* black] Insert a third opening pick at the bottom left corner. |
| + | [* black] Slide the opening pick along the left edge of the phone to slice the rear glass adhesive. |
| + | [* black] Leave the opening pick in its place at the top left corner to prevent the adhesive from resealing. |