Skip to main content

Changes to Step #3

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch


Step Lines

+[title] Soften the display adhesive
[* black] [guide|11677|Prepare an iOpener|new_window=true] (or use a hair dryer or heat gun) and heat the face of the watch to loosen the display adhesive.
[* black] Leave the iOpener on the watch for at least two minutes to fully heat the screen and soften the adhesive holding it to the case.
[* icon_note] You may need to reheat the iOpener and repeat this procedure several times until the display adhesive softens.