Skip to main content

Changes to Step #3

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] [guide|11677|Prepare an iOpener|new_window=true] (or use a hair dryer or heat gun) and heat the face of the watch to loosen the display adhesive.
+ [* black] Leave the iOpener on the watch for at least two minutes to fully heat the screen and soften the adhesive holding it to the case.
+[* icon_note] You may need to reheat the iOpener and repeat this procedure several times until the display adhesive softens.