Skip to main content

Changes to Step #4

Edit by Kyle Smith

Edit approved by Kyle Smith

Before
After
Unchanged

Step Lines

[title] Cut along the perimeter of the rear cover
[* black] Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.
[* icon_note] You can insert each new opening pick in the gaps created by the opening picks left in each corner.
[* black] As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.
-[* icon_note] If the rear cover is still attached to the phone after cutting through all four sides, try slicing through the adhesive again with an opening pick.
+[* icon_note] If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.