Skip to main content

Changes to Step #4

Edit by Kyle Smith

Edit approved by Kyle Smith

Before
After
Unchanged

Step Lines

-[title] Cut along the perimeter of the phone
+[title] Cut along the perimeter of the rear cover
[* black] Repeat the previous heating and cutting procedure for the remaining three sides of the phone.
[* black] Leave an opening pick in each corner as you continue to the next to prevent the adhesive from resealing.
[* icon_note] The rear cover will begin to separate from the phone as you finish all sides of the phone.
[* icon_note] If the rear cover doesn't fully separate from the phone, use an opening pick to try cutting through the adhesive again.