Skip to main content

Changes to Step #2

Edit by Kyle Smith

Edit approved by Kyle Smith

Before
After
Unchanged

Step Lines

[title] Insert an opening pick
[* black] Apply a suction cup to the heated edge of the rear cover, as close to the edge as possible.
[* black] Pull up on the suction cup with strong, steady force to create a gap between the rear cover and the frame.
[* icon_note] Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.
[* black] Insert an opening pick into the gap.
- [* icon_caution] Don't insert the opening pick more than five millimeters into the phone or you risk damaging the internal components.
+ [* icon_caution] Don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.