Skip to main content

Changes to Step #1

Edit by Kyle Smith

Edit approved by Kyle Smith

Before
After
Unchanged

Step Lines

[title] Heat the rear cover
[* icon_caution] Completely power off your phone before you begin disassembly.
[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the left side of the rear cover for one minute.
- [* icon_note] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the screen and internal battery are both susceptible to heat damage.
- [* icon_caution] Only apply as much heat as needed. Excessive heat may deform or damage the plastic rear cover.
+ [* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the screen, internal battery, and the plastic rear cover are susceptible to heat damage.