Skip to main content

Changes to Step #2

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* black] Grip the antenna board and pull it directly away from the center chassis to disconnect it.
- [* icon_note] Don't pull the antenna board ***up*** until it is completely disconnected.
+ [* icon_caution] Don't pull the antenna board ***up*** until it is completely disconnected.
[* black] Remove the antenna board.
[* icon_reminder] During reassembly, align the board's connector with the port on the center chassis and press to reconnect.