Skip to main content

Changes to Step #4

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim


Step Lines

[title] Remove the vibration isolator
-[* black] Lift up and remove the optical drive's vibration isolator.
+[* black] Lift up the optical drive's vibration isolator to remove it.
[* icon_note] The vibration isolator grips the sides of the optical drive with silicone pads, so you may need to "walk" the isolator off of the drive to slip it off each side.
[* icon_reminder] During reassembly, ensure the vibration isolator is pushed down and around both edges of the optical drive, so it sits flush with the rest of the center chassis.