Skip to main content

Changes to Step #2

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[title] Twist and remove the base
[* black] Grip the base and rotate it counterclockwise to unlock it from the shell.
+ [* icon_note] You may need to hold the locking tab open while you get the base started.
[* black] Remove the base.
[* icon_reminder] During reassembly, drop the base tabs into their holes on the shell and twist clockwise until the base snaps into the interior locking tab.
- [* black] When locked in place, the "''Hello from Seattle''" line will be parallel with the device's sides.
+ [* icon_note] When locked in place, the "''Hello from Seattle''" line will be parallel with the device's sides.