Skip to main content

Changes to Step #7

Edit by Sam Omiotek

Edit approved by Sam Omiotek

Before
After
Unchanged

Step Lines

[* black] Insert another opening pick into the top edge of your phone at an angle where a gap has already formed to prevent damage to the OLED panel.
[* black] Use the pick to slice around the top-left corner where the camera window is.
- [* icon_note] If the screen is hard to slice, apply heat to the affected area for one minute and try again.
+ [* icon_note] If the screen is hard to slice, apply heat to the difficult area for one minute and try again.
[* black] Leave the pick inserted along the left edge of your phone to prevent the adhesive from re-sealing.