Skip to main content

Changes to Step #6

Edit by Sam Omiotek

Edit approved by Sam Omiotek

Before
After
Unchanged

Step Lines

[* icon_note] The screen adhesive is very weak and you should not need to re-apply heat. If the screen does feel hard to slice, apply heat to the difficult area for one minute and try again.
[* black] Insert another opening pick into the right edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.
-[* black] Slide the opening pick around the bottom of the phone to cut the adhesive.
-[* black] Leave the pick inserted along the bottom edge to prevent the adhesive from resealing.
+[* black] Slide the opening pick around the top of the phone to cut the adhesive.
+[* black] Leave the pick inserted along the top edge to prevent the adhesive from resealing.