Skip to main content

Changes to Step #5

Edit by Sam Omiotek

Edit approved by Sam Omiotek

Before
After
Unchanged

Step Lines

[title] Slice through the display adhesive
[* black] Slide the pick along the right edge of the screen to cut the adhesive.
[* icon_caution] Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable.
-[* black] Leave the pick in the top right corner to prevent the adhesive from re-sealing.
+[* black] Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.