Skip to main content

Changes to Step #4

Edit by Emily Boda

Edit approved by Emily Boda

Before
After
Unchanged

Step Lines

[title] Separate the screens
-[* black] The glass face should come apart very easily
-[* black] Gently separate the white touch panel from the e-paper screen. These fall apart but are held together by some cables. Keep them how they are.
-[* red] Use a spuger to detach the small cable from the white touch panel. This cable is for the microphone and vibration motor.
-[* black] Now there is only one cable that is attaching the screens to the motherboard.
-[* blue] Use a spuger to detach the second cable. The second picture shows it already detached.
-[* green] ''Be extremely careful with this display cable. It is attached to the display at an extremely thin glass piece that breaks easily. If the glass breaks, it cannot be repaired.''
+[* black] The glass face should come off with a little coaxing from a pick.
+[* black] Gently separate the white touch panel from the e-paper screen. These fall apart easily but are held together by two cables.
+[* red] Use a spudger to detach the small cable from the white touch panel. This cable is for the microphone and vibration motor.
+[* blue] Use a spudger to detach the second cable. This cable is for the display. The second picture shows it already detached.
+[* green] ''Be extremely careful with the display cable. It is attached to the display at an extremely thin glass piece that breaks easily. If the glass breaks, it cannot be repaired.''