Skip to main content

Changes to Step #12

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Side A of IC ID, continued:
- [* red] Bosch Sensortec Unknown Inertial Measurement Unit (Likely)
- [* orange] Bosch Sensortec [https://www.bosch-sensortec.com/products/motion-sensors/accelerometers/bma456.html|BMA456] 3-Axis Accelerometer
- [* yellow] NXP Semiconductor CBTL610A38 Display Port Multiplexer (Likely)
- [* green] Lattice Semiconductor [https://www.latticesemi.com/Products/FPGAandCPLD/MachXO2|LCMXO2-2000ZE] MachX02 Field Programmable Gate Array
- [* light_blue] Diodes Incorporated [link|https://www.diodes.com/part/view/PI3USB102E?BackID=2466|PI3USB102E] 480 Mbps USB 2.0 Switch
- [* blue] Texas Instruments [link|https://www.ti.com/product/TMUX136|TMUX136] 2-Ch. 2:1 Analog Switch
- [* violet] Texas Instruments [link|https://www.ti.com/product/SN74AVC4T774|SN74AVC4T774] 4-Bit Dual-Supply Bus Transceiver
+ [* red] Bosch Sensortec, likely an inertial measurement unit
+ [* orange] Bosch Sensortec [https://www.bosch-sensortec.com/products/motion-sensors/accelerometers/bma456.html|BMA456] 3-Axis accelerometer
+ [* yellow] NXP Semiconductor CBTL610A38, likely a display port multiplexer
+ [* green] Lattice Semiconductor [https://www.latticesemi.com/Products/FPGAandCPLD/MachXO2|LCMXO2-2000ZE] MachX02 field programmable gate array
+ [* light_blue] Diodes Incorporated [link|https://www.diodes.com/part/view/PI3USB102E?BackID=2466|PI3USB102E] 480 Mbps USB 2.0 switch
+ [* blue] Texas Instruments [link|https://www.ti.com/product/TMUX136|TMUX136] 2-Ch. 2:1 analog switch
+ [* violet] Texas Instruments [link|https://www.ti.com/product/SN74AVC4T774|SN74AVC4T774] 4-bit dual-supply bus transceiver