Skip to main content

Changes to Step #2

Edit by David

Edit approved by David

Before
After
Unchanged

Step Lines

[title] Straighten PCB
[* black] The circuit board can cause problems if it is not properly centered on the sheet metal mount. See the picture for details.
[* black] The blue lines in the picture show the edges of the white metal PCB plate, while the red lines show the edge of the PCB. Adjust the PCB so it lines up as closely as possible with the metal plate. This will ensure that the PCB does not contact the edge of the tube while rotating.
[* black] The blue lines in the picture show the edges of the white metal PCB plate, while the red lines show the edge of the PCB. Adjust the PCB so it lines up as closely as possible with the metal plate. This will ensure that the PCB does not contact the edge of the tube while rotating.