Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

[title] Lever up the battery
-[* black] Place the flat end of a supdger in the small gap between the plastic frame and the battery opposite to the display cable.
-[* black] Carefully lever the spudger to lift the battery up.
- [* icon_note] The battery is glued into the plastic frame with mild adhesive. Take your time.
-[* icon_caution] Do not remove the battery yet. Its connector cable is still adhered to the watch body.
+[* black] Place the flat end of a supdger in the small gap between the plastic frame and the battery, opposite to the display cable.
+[* black] Carefully lever the battery up and out of its recess.
+ [* icon_note] The battery is adhered to the core with light adhesive, so take your time.
+[* icon_caution] Don't try to remove the battery completely yet, as its connector is still adhered to the core.