Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

-[title] Lever battery out
+[title] Lever up the battery
[* black] Place the flat end of a supdger in the small gap between the plastic frame and the battery opposite to where the cables are.
[* black] Carefully lever the spudger to lift the battery up.
[* icon_note] The battery is glued into the plastic frame with mild adhesive. Take your time.
[* icon_caution] Do not remove the battery yet. Its connector cable is still glued down.