Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

+[title] Lever up the battery
+[* black] Place the flat end of a supdger in the small gap between the plastic frame and the battery opposite to where the cables are.
+[* black] Carefully lever the spudger to lift the battery up.
+ [* icon_note] The battery is glued into the plastic frame with mild adhesive. Take your time.
+[* icon_caution] Do not remove the battery yet. Its connector cable is still glued down.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added