Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

-[* black] Push the battery out of its recess through the cutout in the plastic frame.
- [* icon_note] The battery cable may slightly stick to the plastic frame—pull carefully.
-[* black] Remove the battery.
+[title] Lever battery out
+[* black] Place the flat end of a supdger in the small gap between the plastic frame and the battery opposite to where the cables are.
+[* black] Carefully lever the spudger to lift the battery up.
+ [* icon_note] The battery is glued into the plastic frame with mild adhesive. Take your time.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version