Changes to Step #3
Edit by Carsten Frauenheim —
Edit approved by Carsten Frauenheim
- Before
- After
- Unchanged
Step Lines
| [title] Disconnect the battery | |
| - | [* black] While holding the cover up out of the way, use the tip of a spudger to lift straight up on the battery connector to disconnect it. |
| - | [* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage. |
| + | [* black] While holding the metal shield up and out of the way, use the tip of a spudger to pry up the battery connector to disconnect it. |