Fix Your Stuff Community Store

Changes to Step #8

Edit by Carsten Frauenheim —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* black] Insert a fourth and final opening pick into the gap on the right side of the phone, sliding it down towards the bottom right corner of the phone to slice the adhesive.
-[* black] The back panel will begin to separate from the phone as you get closer to the bottom edge.
+[* icon_note] The back panel will begin to separate from the phone as you get closer to the bottom edge.
[* black] Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive, reheating as necessary.