Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Lift the display up from the frame and remove it from the iMac.
[* black] It may be necessary to slowly lift from one side to peel against the remaining adhesive.
[* icon_caution] Be very careful handling the display—it's big, heavy, and made of glass.
-[* icon_reminder] After the adhesive is cut, it cannot be used to re-seal the display in place. Follow [guide|136337|this guide|new_window=true] to replace the adhesive strips that secure the display to the rear enclosure.
+[* icon_reminder] After the adhesive is cut, it cannot be used to re-seal the display in place. Follow [guide|137411|this guide] to replace the adhesive strips that secure the display to the rear enclosure.