Skip to main content

Changes to Step #4

Edit by Apurva Patel

Edit approved by Apurva Patel

Deleted
Added
Unchanged

Step Lines

[* black] The screen is now connected only by a small cable that runs to the backrear board of the computercamera. Using tweezers, slowly pull the cable out of the connector.
[* black]
For best results, grip the cable as close to the connector as possible.
[* black] The screen is now connected only by a small cable that runs to the backrear board of the computercamera. Using tweezers, slowly pull the cable out of the connector.
[* black]
For best results, grip the cable as close to the connector as possible.
[* black] The screen should now be separate from the camera body. Be careful not to harm the connectors on the lens so it will reconnect successfully.