Skip to main content

Changes to Step #3

Edit by Greg H

Edit approved by Greg H

Deleted
Added
Unchanged

Step Lines

[* black] Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.
[* black] Do not pull to hard on the screen as there is still a delicate cable running from the screen to the rear board of the camera.
[* black] Gently pull the wide ribbon cable from the front of the camera to the back using tweezers.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added