Skip to main content

Changes to Step #3

Edit by Apurva Patel

Edit approved by Apurva Patel

Deleted
Added
Unchanged

Step Lines

[* black] Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.
[* icon_noteblue] Do not pull too hard on the screen as there is still aanother delicate cable running from the screen to the rear board of the camera.
[* black] Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.
[* icon_noteblue] Do not pull too hard on the screen as there is still aanother delicate cable running from the screen to the rear board of the camera.
[* black] Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.

Image 2

Old Version

New Version