Skip to main content

Changes to Step #3

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.
-[* icon_note] Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.
+[* black] Use the tool like a pizza cutter—roll it along the gap, cutting the foam adhesive in between the frame and display.
+[* icon_note] Be sure to always push with the cutting wheel forward. If you pull, the wheel might get pulled out of the handle.
[* black] Run the tool up along the left side of the display.