Skip to main content

Changes to Step #3

Edit by Phryne

Edit approved by Phryne

Before
After
Unchanged

Step Lines

+[title] Chip Grinding
+[* black] Stick high-temperature tape around the touch module on the replacement screen. Then wrap the screen with protective film.
+[* black] Now we will grind the touch module with the electric chip grinding tool.
+[* icon_caution] Be patient during the grinding. Start with the top layer then move on to the next layer. Also, be careful not to damage flex cables nearby.
+[* black] With solder joints coming out, stop the grinding work. Clean the bonding pad with PCB Cleaner soaked cotton swap afterwards.