Skip to main content

Changes to Step #14

Edit by Tarun Thiruma

Edit approved by Tarun Thiruma

Before
After
Unchanged

Step Lines

-[title] Separate the Top Edge Adhesive
+[title] Separate the top edge adhesive
[* icon_caution] The glass near the corners of the back cover is curved and very susceptible to cracking. Be gentle during this step to prevent damaging your back cover.
[* black] Gradually slide the pick from the right edge of the device around the top right corner.
[* black] Continue cutting along the top edge to fully separate the back cover adhesive.
- [* icon_note] If the cutting becomes difficult at any point, reapply heat before continuing.
+ [* icon_note] If the cutting becomes difficult at any point, stop and reapply heat before continuing.