Skip to main content

Changes to Step #12

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Insert another pick underneath the center of the right edge of the back cover.
-[* black] Gradually slide the pick toward the top of the device to separate the back cover's adhesive.
- [* icon_note] As you do this, the bottom edge of the back cover may begin to rise away from the rest of the device, releasing the 3 picks located there. If this occurs, set these picks aside as the bottom edge shouldn't reseal from this point onward.
+[* black] Gradually slide the pick towards the top of the device to separate the back cover's adhesive.
+ [* icon_note] As you do this, the bottom edge of the back cover may release the three picks located there. If this occurs, set these picks aside as the bottom edge shouldn't reseal from this point onward.