Skip to main content

Changes to Step #12

Edit by Tarun Thiruma

Edit approved by Tarun Thiruma

Before
After
Unchanged

Step Lines

-[* black] Insert another pick in underneath the center of the right edge of the back cover.
+[* black] Insert another pick underneath the center of the right edge of the back cover.
[* black] Gradually slide the pick toward the top of the device to separate the back cover's adhesive.
[* icon_note] As you do this, the bottom edge of the back cover may begin to rise away from the rest of the device, releasing the 3 picks located there. If this occurs, set these picks aside as the bottom edge shouldn't reseal from this point onward.