Skip to main content

Changes to Step #10

Edit by Tarun Thiruma

Edit approved by Tarun Thiruma

Before
After
Unchanged

Step Lines

[title] Separate the right edge adhesive
[* black] Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.
[* black] Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.
+[* black] Insert the point of an opening pick into the gap.
[* icon_note] Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.