Skip to main content

Changes to Step #8

Edit by Tarun Thiruma

Edit approved by Tarun Thiruma

Before
After
Unchanged

Step Lines

[* black] Insert another pick under the center of the left edge of the back cover.
[* black] Gradually slide the pick towards the top of the device to separate the back cover's adhesive.
- [* icon_note] Take care when sliding across the ridge in the frame surrounding the volume and power buttons.
+ [* icon_caution] Take care when sliding across the ridge in the frame surrounding the volume and power buttons—the cutout in the glass may make it more prone to cracking.
[* black] Leave your pick under the left edge of the glass near the top of the device to prevent the adhesive from resealing.