Skip to main content

Changes to Step #8

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* black] Insert another pick in under the center of the left edge of the back cover.
-[* black] Gradually slide the pick toward the top of the device to separate the back cover's adhesive.
+[* black] Insert another pick under the center of the left edge of the back cover.
+[* black] Gradually slide the pick towards the top of the device to separate the back cover's adhesive.
[* icon_note] Take care when sliding across the ridge in the frame surrounding the volume and power buttons.
-[* black] Leave your pick here under the left edge of the glass near the top of the device to prevent the adhesive from resealing.
+[* black] Leave your pick under the left edge of the glass near the top of the device to prevent the adhesive from resealing.