Skip to main content

Changes to Step #14

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[* black] Lift and remove the battery.
+[* icon_reminder] Before installing a new battery, remove all remaining adhesive from the MacBook Pro's case.
+ [* black] Peel off any large strips of adhesive using tweezers or gloved fingers.
+ [* black] Scrape away any remaining chunks of adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction (not back and forth) until the chassis is clean and ready for your new battery.
+ [* black] This can take quite a bit of work, so be patient.

Image 1

No previous image

Added

Image 2

No previous image

Added