Skip to main content

Changes to Step #5

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[title] Remove the trackpad assembly screws
[* black] Use a T5 Torx driver to remove the 13 screws securing the trackpad assembly:
[* red] Nine 5.8 mm screws
[* orange] Four 4.9 mm screws
[* icon_reminder] These screws all look similar—be careful not to mix them up.
[* icon_reminder] Adding a little blue threadlocker to the screw threads during reassembly can help prevent the screws from working themselves loose over time.
[* icon_reminder] Install the screws loosely at first, and then check the trackpad alignment before tightening them down.