Skip to main content

Changes to Step #1

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[title] Remove battery board sticker
[* black] Peel up and remove the insulating sticker covering the battery board, on the edge of the logic board nearest the battery.
[* black] If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.
[* icon_reminder] If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.