Skip to main content

Changes to Step #1

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[* black] Peel up and remove the insulating sticker covering the battery board, on the edge of the logic board nearest the battery.
+ [* black] If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.
+[* icon_reminder] If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

Image 1

No previous image

Added