Fix Your Stuff

Right to Repair

Store

Changes to Step #7

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* red] RemoveUse your Torx driver to remove the two outer 6.5 mm Torx screws securing each of the two display brackets to the upper case (4 screws total).
[* icon_note] Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.
[* red] RemoveUse your Torx driver to remove the two outer 6.5 mm Torx screws securing each of the two display brackets to the upper case (4 screws total).
[* icon_note] Mid 2009 models require a T6 Torx driver, while Mid 2010 models require a T8.