Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* icon_caution] It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.
[* black] Pull the camera cable connector toward the optical drive to disconnect it from the logic board.
[* icon_note] This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

Image 1

Old Version

New Version