Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* icon_caution] Be very cautious and gentle to not break the socket off the board.
[*
black] Using the flat end of a spudger, gently pry the right speaker/subwoofer cable connector straight up off the logic board. Be'''Be careful not to lift the socket. Pull'''Pull the connector toward the optical drive.
[* icon_caution] Be very cautious and gentle to not break the socket off the board.
[*
black] Using the flat end of a spudger, gently pry the right speaker/subwoofer cable connector straight up off the logic board. Be'''Be careful not to lift the socket. Pull'''Pull the connector toward the optical drive.
[* icon_note] Pry up from beneath the wires.