Skip to main content

Changes to Step #1

Edit by Dave Farinelli

Pending approval

Before
After
Unchanged

Step Lines

[* icon_caution] For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is ***optional*** and is not required.
[* black] Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board.
+ [* black] Make sure ***''not''*** to use an electrical-conducting part, such as a screwdriver, to lift the battery connector out. By doing this, you risk shorting out the logic board.

Image 1

Deleted