Skip to main content

Changes to Step #1

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[title] Remove the lower case
-[* icon_caution] Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
+[* icon_caution] Before you proceed, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
[* black] Use a P5 Pentalobe driver to remove the six screws securing the lower case:
[* red] Two 6.2 mm screws
[* orange] Two 5.3 mm screws
[* yellow] Two 3.4 mm screws
[* icon_reminder] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your device.