Skip to main content

Changes to Step #2

Edit by albertob

Edit approved by albertob

Before
After
Unchanged

Step Lines

[* black] Lift the display from the bottom to the top where the flat and connector is located.
[* black] removeRemove the black interlocking covercover.
[* black] releaseRelease the connectorconnector.
[* black] Thoroughly clean the surfacesRemove any trace of glue from the glue residuessurfaces.
[* black] removeRemove the black interlocking covercover.
[* black] releaseRelease the connectorconnector.
[* black] Thoroughly clean the surfacesRemove any trace of glue from the glue residuessurfaces.