Skip to main content

Changes to Step #1

Edit by CPU Repairs

Edit approved by albertob

Before
After
Unchanged

Step Lines

[* black] Using an iOpener, hairdryer or heated plate, heat the glass to weaken the adhesive beneath.
[* black] It is important to use thin tools on the whole profile and insert them between the plastic frame and the glass. Don't insert between the aluminum frame and the plastic frame orelse you may cause damage yourthe device.
[* black] It is important to use thin tools on the whole profile and insert them between the plastic frame and the glass. Don't insert between the aluminum frame and the plastic frame orelse you may cause damage yourthe device.